Extensive manufacturing facilities with injection moulding machines with clamping forces of up to 4,000 tonnes
Why the machine capacity of your injection moulding partner is key to the success of your product.
When developing large plastic products, much attention is often devoted to the design, material choice and mould development. But one factor is often underestimated: the available machine capacity of the manufacturer.
For large technical plastic products, the capacity of the manufacturing facilities determines which dimensions are possible, the degree of design freedom you have, which product quality is achievable and how scalable the production process is.
Developing and manufacturing large plastic products demands specialist knowledge and the right machine capacity. Not every plastic manufacturer can offer the machines, mould dimensions and production capacity required for large technical plastic parts.
HSV TMP specialises in the development and production of large plastic products and has one of Europe’s largest manufacturing facilities for injection moulded products.
With machines with clamping forces from 300 to 4,000 tonnes, we are a leading European player in the injection moulding of large plastic products, technical housings and structural plastic parts.
By offering a combination of services, including engineering, product development and machine capacity, we support OEMs, industrial manufacturers and product developers with the realisation of innovative, high-quality plastic products that are strong, lightweight and cost efficient.
Among the largest manufacturing facilities for plastic injection moulding
An important and distinctive characteristic of HSV TMP is the size of our manufacturing facilities, which are specifically set up for the production of large plastic products and technical components.
The production capacity and technology of HSV TMP includes:
- Injection moulding machines with clamping forces from 300 to 4,000 tonnes
- Product weights from approx. 0.5 to 25 kilogrammes
- Injection volumes from 1 to 33 litres
- Five machines with clamping forces of more than 2,000 tonnes
- Large moulds of up to 3.1 x 3.4 metres
- High-pressure injection moulding
- Cascade injection moulding
- Structural foam moulding
This allows us to produce both medium-sized and very large plastic products with a high degree of efficiency and reproducibility.
Large plastic products require large machines
More and more products are being designed as integrated plastic structures. This has led to a corresponding increase in dimensions and technical requirements.
With machines with clamping forces of up to 4,000 tonnes, HSV TMP can meet these demands. We can manufacture products that are too large or complex for many injection moulding firms, allowing features to be integrated, lowering assembly costs and allowing stronger structures to be produced.
Our machines with clamping forces above 2,000 tonnes are particularly suitable for the production of large, technical plastic products with weights of 5 to 25 kilogrammes.
Capacity for large moulds
Alongside the clamping force, the available space for moulds determines the options that an injection moulding firm can offer. HSV TMP can accommodate large moulds of up to 3.1 metres high and 3.4 metres wide.
This allows us to produce very large plastic products and technical components in our own facilities, making HSV TMP one of the most important specialised partners in Europe for large plastic injection moulded products.
What does this mean for product developers?
More design freedom from the first sketch
If your manufacturer has access to larger machines, the product development phase offers more options. Thanks to our technical expertise, we can also help you improve the feasibility, select materials and optimise your large plastic product during the development phase.
This gives you the following benefits:
- Larger parts can be produced as a single piece
- Less assembly work
- Fewer separate components
- Higher structural strength
- Better dimensional stability
- Lower production costs
- More options for integrating features
- Lower risk of out-of-tolerance defects
For product developers, this means greater freedom to integrate features in a single part while also lowering the total production costs.
What does this mean for OEMs and buyers?
For OEMs and buyers, the available machine capacity is not just about the product size, but also the security of supply and scalability.
For buyers and OEM organisations, the available production capacity is not simply a technical question, but also a strategic question. Thanks to our extensive manufacturing facilities, we can offer you that capacity.
Several benefits at a glance:
- Greater production capacity during peak periods
- Ability to produce product families on different machines
- Flexibility to handle volume growth
- Continuity of production
- Less dependency on individual machines
- Efficient production planning
- Reliable serial manufacturing
These capacities allow us to support you from the start of the product development process up to and including long-term serial production.
Machine capacity combined with specialist knowledge
Always the most efficient production technology.
The success of large plastic products is not just determined by the machine, but also by the knowledge behind the production process. HSV TMP combines our extensive machine capacity with expertise in:
- Plastic product development
- Engineering and R&D
- Simulation software
- Feasibility analyses
- Injection moulding
- High-pressure injection moulding
- Cascade injection moulding
- Structural foam moulding
This means we can advise you at an early stage about which production technology offers the best balance between weight, strength, quality and cost price.
Why do customers choose HSV TMP?
From prototype to serial production, a single partner for development and production.
For OEMs and product developers, it is important not just to find a manufacturer but also a partner who can grow with you throughout the entire product life cycle.
Our customers also choose HSV TMP because we offer a combination of development, engineering and production, which keeps knowledge, quality and process control together within a single organisation.
We stand out by offering:
- Machines with clamping forces from 300 to 4,000 tonnes
- Specialist in large plastic products
- Product weights from 0.5 to 25 kilogrammes
- Five machines with clamping forces of more than 2,000 tonnes
- Large moulds of up to 3.1 x 3.4 metres
- Specialist in structural foam moulding and cascade injection moulding
- Own R&D and engineering department
- Advanced simulations and product optimisation
- Support from development to serial production
- High production capacity and security of supply
- Reliable partner for OEMs and industrial customers
- International delivery options
HSV TMP: Partner in large plastic products
Are you looking for a partner with the machine capacity, knowledge and experience to develop and manufacture large plastic products?
HSV TMP combines manufacturing facilities for plastic injection moulding that are among the largest in Europe with specialist knowledge of product development, engineering, high-pressure injection moulding, cascade injection moulding and structural foam moulding.
This allows us to produce large technical plastic products efficiently, reliably and at an industrial scale. We help customers across the globe successfully bring innovative, strong and cost-efficient plastic products to market.
HSV TMP is the leading specialist in large plastic injection moulded products and structural foam moulding, from development to serial production.
